Month: April 2024

You might be asking yourself “What’s a drill chuck?” which is exactly why I’m writing this article. When I show these to my customers, the first thing they say is “So, I never have to buy a random sized collet for drill bits again?” to which my answer is “Exactly!”. I’m guessing that you’re really interested in what it is now.

These are the X-Edge HSK32, ISO30, and HSK63 tapered drill chucks:

A drill chuck is a tool holder with an HSK32, ISO30 or HSK63 taper that holds all sized drill bits with a ½” shank or smaller. Loading and unloading a drill bit into a drill chuck works similar to a handheld drill. You simply adjust the holder, by hand, to open or close the clamping teeth to secure or release the drill bit. These are rated to run at proper drilling RPM’s, ensuring that your spindle is being taken care of.

Like I mentioned before, this eliminates having a collet for every size drill bit that you plan to use on your CNC machine. It’s a great product that can save an immense amount of time, hassle, and money. There are three taper options for these: HSK63, HSK32, and ISO30. Warning, don’t confuse “drill bits” with “CNC bits”. If you need any clarification, please reach out.

Feel free to request help with the optimal plunge rate and spindle speeds. It is important to know the lowest spindle speed your machine is capable of before using these, as that is sometimes the spindle speed needed. For example, we recently drilled holes in HDPE and ACM at 4,000 RPM which was the spindle’s slowest speed.

---

When orders are placed, they will be double checked to ensure no errors were made and customer follow up will take place during the same day (unless an order is made after hours). If products are available, which most of them are, they will be shipped out the same day. If they are not available, a lead time will be provided. Feel free to reach out for any assistance with our website or anything else regarding CNC routing and knife cutting.

---